EMCO MAXXTURN 45 TEXT

Fabrication number: S4C141101
Operating voltage: 3 x 400 V
Frequency: 50/60 Hz
Rated current: 45 A
Control system: SIEMENS SINUMERIK 840 D
Rotation diameter over bed: 430 mm
Rotation diameter over cross slide: 300 mm
Max. turning diameter: 300 mm
Max. part length: 480 mm
Max. bar passage: 45 mm
Center width (spindle nose to tailstock center point): 670 mm
Distance main spindle to counter spindle: 720 mm
Travel distance X: 160 mm
Z travel: 510 mm
Main spindle:
Outer spindle diameter in the front bearing: 80 mm
Main spindle clamping system: Wood clamping cylinder with tow bar with max. passage 45 mm
Max. Chuck size: 160 mm diameter
Speed range: 0 - 6300 rpm (infinitely variable)
Counter spindle (spindle 2):
Spindle connection: KK 4
Outer spindle diameter in the front bearing: 70 mm
Travel distance Z2: 510 mm
Travel speed: 30 m/min
Holding force: 6000 N
Counter spindle clamping system: Full clamping cylinder with drawbar for chuck parts up to 140 mm diameter
Max. Chuck size: 130 mm diameter
Counter spindle drive: Siemens drive 7/10 kW
Speed range: 0 - 6300 rpm
Max. Torque: 42/43 Nm
C-axis (rotary axis):
Resolution of the rotary axis: 0.001°
Rapid traverse: 1000/min
Spindle indexing: 0.001°
Y-axis:
Travel range: +40/-30 mm
Feed force: 4000 N
Rapid traverse speed Y: 10 m/min
Feed drives:
Feed force X/Z axis: 4000/6000 N
Rapid traverse speed X/Z: 24/30 m/min
Acceleration from 0 to rapid traverse X/Z: 6/8 m/s²
Tool system:
Disk turret with directional logic with driven tools
Tool holder: VDI 25
Tool cross-section for square tools: 16 x 16 mm
Shank diameter for boring bars: 25 mm diameter
Number of tool stations: 12 (all driven)
Turret switching time: 0.2 s
Driven tool stations:
Speed range: 0 - 6000 rpm
Max. drive power: 4 kW
The machine is equipped with a counter spindle, a three-jaw chuck and a 12-station tool turret. Also a chip conveyor from the manufacturer KNOLL
Read spindle hours: approx. 20,000
Incl. parts ejector and parts gripper Çeviriyi göster